Format Civil 01 : Record of Calibration of Survey Instruments

 Find below Format Civil 01 : Record of Calibration of Survey Instruments

for excel format click this download link



Prepare and keep a list of instruments that need calibration for example : these instruments can be


 Theodolite 
 Levels 
Steel measurement tapes
 Cross staff 
 Distomat 
 All balances 
 Weigh Batcher 
Cube testing Machine 
 Pressure Gauges
 Dial gauges 
Dead weight tester 
Vernier caliper/ screw gauge 
 Holiday tester 
Universal Testing Machine 
Charpy V-notch Impact testing machine 
Hardness Testing Machine 
Various Digital and Analog meters 
Variable current, voltage and resistance generators 
Temperature/ Pressure Recorders 
Temperature gauges including RTDs
 Thermocouples
 Vibration probes
 Decibel-meter 
 Any other 



Comments

Post a Comment

Popular posts from this blog

Out Turn Work (Labor output)

The term "Out Turn Work" or Labor Output refers to the quantity of work that can be accomplished by a worker or a team in a specific period (typically a day). It is used to estimate labor productivity in construction. Here is a general list of labor output for various types of construction work. The exact output can vary based on factors such as labor skill level, working conditions, material availability, and site constraints. General Construction Works Earthwork and Excavation Manual Earthwork (Soft soil): 2.5 - 3.5 m³ per labor per day Manual Earthwork (Hard soil): 1.5 - 2 m³ per labor per day Manual Excavation (Rock, by chiseling): 0.5 - 1.0 m³ per labor per day Concrete Work Mixing and placing concrete (by hand): 1.5 - 2.5 m³ per labor per day Mixing and placing concrete (by machine): 6 - 8 m³ per labor per day Concrete Formwork (shuttering, vertical formwork): 2.5 - 4 m² per carpenter per day Brickwork and Masonry Brickwork (standard bricks, in 1:6 cement mortar): 1.2...
Read more

TESTING OF SOIL IN CIVIL ENGINEERING - QUALITY CONTROL

1.0    FIELD CLASSIFICATION OF SOILS 1.0    GENERAL: Types of Soil tests for building construction works depend on properties of soil. Design of the foundation is based on soil test report of construction site.  Soil is a very important part of the design and building of any structure. Since the soil is in direct contact with the structure, it acts as a way to transfer loads. Any analysis of forces acting on the structure must consider how stresses are spread through the soil since the structure’s stability depends on the soil’s properties. At the feasibility stage, it is important to conduct a geotechnical study of the site before the design begins. It is a key design input that helps to understand the subsoil on which the structure will stand.  Unlike construction material like Cement, Steel, Bricks and timber, soil does not possess a constant parameter. The type of soil, its density, moisture content and so its strength and deformation characteristic...
Read more